|
RCD - DIN-rail mounting
Programmable Recyclic Timers
RCD-8 operate 4 up to 8 loads at recycled mode. RCD-16 operate 8 up to 16 loads.
- Output: 4 / 8 / 16 "Electronic Contacts",
1A / 230 VAC or 24 VDC.
- Power supply: 110 / 220VAC or 24 VDC
- Repeatability: +1% under fixed condition.
- Display: 4/8/16 LED-s indicate active output.
|
|
|
Analog to Frequency Converter
MATP
MATP Converts Analog Signals
to Pulses 0.01Hz...KHz. ( 60 pulses per hour - 0.0166Hz).
The MATP is used for accumulation A/h or volume units (m3, Galons etc..)
by an external counter.
- Input : 4-20mA / 0-60mV DC, 0-10V DC etc..
- Outputs : pulses 24V / O.C. / optocoupler / dry contact.
- Power supply : 110/220 VAC or 12/24 VDC
- Compact , DIN rail-mounted enclosure with 12 Pin plug-in connector.
| |
Two 2 wire Transmitters in one package
MTWT-I-D
MTWT-I-D includes 2 "two wire Isolated Transmitters".
Convert 2 Electrical input signals into
two Galvanic Isolated output signals.
- Inputs : 4-20mA / 0-10V DC
- Outputs : 4-20mA passive
- Power supply : 13 - 30 VDC
- Zero and Span calibration for each transmitters
- DIN rail-mounted enclosure
|
|
|
Dual Output Transmitter MISCN-D
Converts electrical input signal to two Galvanic isolated output signals.
- Input : 4-20 mA ( Rin < 20 Ohm ) or 0-10V.
- Outputs : 2 Active Outputs 4-20 mA or 0-10V
or one 4-20 mA and the second 0-10V.
- Power supply : 24VDC or 12VDC.
- Zero and Span calibration for each output.
- Galvanic Isolation between : Input , Outputs and power-supply.
- Compact , DIN rail-mounted enclosure with 12 Pin plug-in connector.
|
|
MTCT - 3 transmitters (2 wire, Isolated) in one package.
- Input: AC current up to 10A ( the conductor passes through taroid coil).
- Accuracy : +1.0%F.S.
- Output : 4-20mA passive ( 2 wire )
|
PULSAR
|
BLACKBOX Ultrasonic
System for level monitoring and control.
- Range: Dependent on Transducer. Nominally 0.125m to 40m .
- Signals are being analysed by Pulsar's amazing DATEM software
- Power Supply:115/230V AC / 24V DC.
- BLACKBOX: ( Keyboard and display)
Model BB130: 2 Relays and 4-20 mA.
Model BB134 for digital communications Modbus or Profibus.
Model BB136 has internal Data Logger.
- Series of dB Transducers are ATEX Zone 1 certified, with the option
of Zone 0.
|
|
IMP
- All-in-one self contained Ultrasonic units for level monitoring and control.
- Ranges: 0.125-3m (IMP 3), 0.3-6m (IMP 6), 0.3-10m (IMP 10).
- 2 alarm relays.
- 2 / 3 wire connection , 2-wire I.S.
- Program by the integral keypad or by using IMPview software.
|
|
|
|
BCM SENSOR
Pressure Transducers & Transmitters
- Technologies: metall-foil strain gauge piezo-resistive silicon die
ceramic sensor
- Measuring ranges: 0/10, ..., 0/700 -1/0, ..., 0/6 0/2,...,0/20 bar
- Output:4-20 mA / mV / V
|
Differential Pressure Transmitter
Measure the differential pressures in mbar scale with high accuracy.
For Differential, Gauge and Absolute Pressure.
|
|
AALBORG
RotaMeters (variable area type flowmeters)
- Single & Multiple Tube Flow Meters;
- Brass, Stainless and PTFE Flow Merets ets..
- Flow Meters are installaled vertically in lines Gases or Liquids to be monitored.
Mass Flow Meters and Controllers
- Flow ranges from 10 sccm to 1000 sL/min N2;
- Max pressure of 500 psig;
- 0-5 VDC and 4-20mA Outputs;
- Built-in tiltable LCD readout.
Vortex Inline Flowmeter
- Fluid types: liquid, Gas, Steam
- Pipe: 3/4" to 6"
- Air flow range: 2.2 to 58123 SCFM
- Outputs: 4-20 mA
|
Abest
|
|
Fixed and Portable Transit Time Ultrasonic Flow Meters.
- Features:
- Flow: 0 to 12 metres per second
- Accuracy: ±0.5% of measured value
- Pipe Size: 25mm to 5000mm (1 to 200")
|
|
|
Belt-Way Scales
Belt Scales
Solids Flow Meters
|
|
- Easy to install
- NEMA 4x enclosure
- Self-aligning
- Power: 120Vac/220Vac/12Vdc/24Vdc.
-
Integrators:
Belt Way Control
|
|
|
Continuous in-line weighing of dry bulk materials from powders to granules.
Material Flows down a tube and strikes an impact plate that is supported by
two single point suspension Load Cells.
|
|
LASCAR
Data Loggers
The worlds first range of direct to USB interface data loggers.
This range includes loggers that measure Temperature, Humidity, Voltage or 4-20mA
Loop Current. |
ELECTRO SENSORS
|
Industrial Speed and Vibration Monitoring and Motor Controls.
- Sensors, Switches & Pulse Generators
- Caunters & Tachometers
- Vibration Monitors & Tilt Switches
- Closed Loop Motor Controllers
|
|